The ultraviolet LED curing lamp is a semiconductor light emitting device that directly generates ultraviolet light. The light emitting wavelength is a light source with a wavelength of 200nm to 450nm. It can be divided into two categories: LED UV point light source and LED UV line surface light source.
Characteristics of UV LED curing lamps At present, most domestic manufacturers still use traditional UV mercury lamps to work, but UV LED will eventually replace mercury lamps because its advantages are much greater than traditional mercury lamps!
1. Ultra-long life: The service life is more than 10 times that of the traditional mercury lamp curing machine, about 25,000 to 30,000 hours.
2. Cold light source, no heat radiation, low temperature rise on the surface of the illuminated product, solving the long-standing thermal damage problem in optical communication and liquid crystal production. It is especially suitable for occasions requiring small temperature rise, such as liquid crystal edge sealing and film printing.
3. The heat generation is small, which can solve the problem of the high heat generation of the mercury lamp printing equipment and the unbearable problem of the staff.
4. Instantly lights up, no need to warm up and instantly reach 100% power UV output.
5. The service life is not affected by the number of opening and closing.
6. High energy, stable light output, good uniform irradiation effect, and improved production efficiency.
7. The effective irradiation area can be customized, the length is from 20mm to 1000mm.
8. It does not contain mercury and does not produce ozone. It is a safer and more environmentally friendly alternative to traditional light source technology.
9. Low energy consumption, the power consumption is only 10% of the traditional mercury lamp curing machine, which can save 90% of the power.
10. The maintenance cost is almost zero, and the use of UVLED curing equipment can save at least 10,000 yuan/set of consumables every year.
UV LED curing lamp application area LED UV curing lamp application scope: electronics, precision parts, magnetic heads, optical lenses, liquid crystal display panels, micro motors, medical supplies, handicrafts, fiber optic connectors, liquid crystals, LCDs, motors, hard disks and other emerging fields. Wide range of applications. Or it can be used with automatic or manual dispenser. It is a replacement product of traditional fiber optic high pressure mercury lamp type point light source machine.
