SMD light source refers to surface mount light-emitting diodes, which have the advantages of large light-emitting angle, high production efficiency, good precision, low false soldering rate, light weight, small size, etc., which can help improve production efficiency and use in different facilities. At present, the latest product of Liyang shares flip-chip new product FE30/FE35 series, adopts imported EMC bracket, supports 1A high current in and out, the highest power can reach 3W, the luminous flux is up to 400lm, and the leakage, flickering and dead light caused by the gold wire are completely eliminated. And many other reliability issues. At the same time, the FE30/FE35 patented Molding design increases the light output rate by 10%-15% compared to the previous generation of flat package products. Due to the increase of the front shot area, the product heat path is smoother and the secondary light distribution is easier. The market positioning of FE30/FE35 is very clear: replacing traditional 1W imitation lumen products, upgrading planar EMC3030 products, ceramic substrate 3030/3535 products, replacing similar XPG series products, and cutting into the market through super stability and super cost-effectiveness.
Because the product has the characteristics of small size, large light-emitting angle, strong UV resistance, etc., it can be flexibly combined to form a variety of lighting sources such as module type, light guide type, concentrating type, and reflective type. It is widely used in interior lighting, advertising decoration, urban lighting and other fields.
