What are the characteristics of the LED light source? The installation method of the LED light source is a question that many friends want to know. The led light source is a new type of energy-saving and environmentally friendly light. It is simple to control, easy to install, and has excellent waterproof performance. It is often used in every place in our life that needs light. What are its characteristics? How to install, let me tell you in detail below.
1. It can be programmed to control multiple simultaneous changes at will, which can realize full-color change effects such as synchronized colorful, jump, scan, and water flow. It can also form a dot matrix screen with multiple point light sources to change various pictures, texts, animation effects, etc. ; It has the characteristics of low power and long life.
2. Both the LED point light source and the LED display screen can be controlled by a computer to transmit advertising information in real time, play advertising videos, and change advertising content at will. The LED display has higher pixels, correspondingly higher display accuracy, and better close-range effects. The LED point light source display screen also has a good visual effect when viewed from a long distance, which can meet the long-distance visual needs of large advertisements. The neon sign changes are relatively monotonous, cannot carry out real-time transmission and replacement of advertising content, and have poor use functions.
3. LED point light source can be used not only for dot matrix display screens, but also for outlines of buildings, bridges and other buildings in urban lighting projects, and interior decoration lighting projects for entertainment venues such as hotels and hotels, which have great market prospects .
4. Green lighting is the ecological design goal that the world follows. LED is a high-efficiency and energy-saving light source. It does not need to be filled with mercury, which can reduce energy consumption and reduce the emission of greenhouse gases and other pollutants into the atmosphere. LEDs can also be combined with solar cells. Used in combination, it is one of the most environmentally friendly light sources.
LED light source installation method
1, buckle screw installation: the buckle is locked on the installation wall, and then the lamp can be snapped into the buckle;
2, buckle glue installation: buckle the external engineering glue glued to the installation wall, and then the lamp can be snapped into the buckle;
3, buckle pull wire installation: buckle into the steel wire, and then the lamp can be clicked into the buckle;
4. Installation of profile lock bracket 1): The two mounting brackets are locked on the installation wall according to the spacing, and the lamp is locked on the aluminum profile with screws, and then the locked profile is locked on the mounting bracket;
Profile lock bracket installation 2): The two installation brackets are locked on the installation wall according to the spacing, and the lamp is clamped on the aluminum profile with the connection buckle, and then the fixed lamp profile is locked on the installation bracket;
Profile lock bracket installation 3): The two installation brackets are locked on the installation wall according to the distance, and the lamp with the lampshade is screwed to the aluminum profile, and then the fixed lamp profile is locked on the installation bracket;
5. Profile lock wall installation 1): Use screws to lock the lamp on the aluminum profile, and then lock the locked profile on the installation wall;
Profile lock wall installation 2): Use the connecting buckle to clamp the lamp on the aluminum profile, and then lock the fixed lamp profile on the installation wall; profile lock wall installation 3): Use the lamp with the lampshade to rotate Snap it to the aluminum profile, and then lock the profile of the fixed lamp on the installation wall;
6. For non-planar installations, such as cable-stayed large-diameter steel cables on bridges, it can be installed in the form of a hoop: first lock the hoop to the large-diameter steel cable, and then lock the aluminum profile with the lamp to the hoop Just go;
7. Other installation methods can be developed and designed separately according to actual engineering needs.
