1. Check whether the lampshade, light bar, various parts and accessories used for picking up are thorough;
2. According to the length of the cargo platform, the lampshade is processed to cut the matching length, and the two ends are processed with a 45° cut angle
3. Open through holes with a diameter of 3.5mm on the inner sides of the left and right ends of the cargo desk lampshade to connect with the fixed pad;
4. Open two M3 holes at the bottom of the left and right ends of the lamp trough to connect with the triangle block;
5. Put the deep-ultraviolet LED light strip lampshade of the required equipment into the standard suitable light strip, and connect them together through the triangle block;
6. Use shadowless glue to glue the fixing block to the inside of the glass corresponding to the left and right lampshade openings;
7. Fix the connected lampshade on the cargo platform with screws;
8. Install the wire rod;
9. Device driver. Pay attention to the input and output ports of the equipment, and pay attention to the positive and negative connections when connecting the light bar. The red wire is the positive connection, and the black is the negative connection.
