Although the performance of LED plant lights can be described as powerful compared to traditional plant growth lights, there are still many points worthy of our attention in order to extend the service life of LED plant lights and ensure their use effects. The main points are as follows:
(1) LED plant light installation. Whether it is the first installation or repeated installation, you must complete the installation steps step by step in accordance with the lamp instruction manual, and choose the installation conditions of different types of LED plant lights, such as: lamp link mode, series or parallel, how many units are connected, etc.;
The voltage should be controlled at about the normal voltage of the LED plant light. The difference should not be too large or too small. If the voltage is too large, it will directly burn the lamp. The voltage does not meet the standard for LED plant light. The effect of plant lighting is not obvious, and the low voltage is equivalent for a long time. Since the LED plant light chip is hungry for a long time, anything will get sick after being hungry for a long time.
(2) Clean LED plant lights. Any electrical equipment is the same. There will always be a lot of dust after a long time. The cleaning of LED grow lights requires regular external and internal cleaning.
External cleaning is to clean the exterior of the lamp to ensure a clean and tidy appearance, and the crops that are grown will make people feel clean and hygienic; the cleaning of the light-transmitting shell, the LED plant lamp must maintain a long-time and high-efficiency work, except for the LED plant lamp The effect of the chip itself and the light transmission effect of the housing panel are also very important. If the light transmission housing is too aging, the housing can be directly replaced without affecting the normal use of the plant light.
The interior of the plant lamp is clean. Cleaning the inside of the LED plant light is mainly to ensure the normal heat dissipation of the plant light, to avoid excessive accumulation, poor ventilation, and reduced heat dissipation efficiency. When cleaning the interior of the LED plant, do not wipe it with a wet towel to avoid corrosion of related metal parts. You can use a hair dryer with cold air or a soft brush to gently sweep away the dust. In order to ensure the normal use of the LED plant light and extend the life of the lamp.
(3) Environmental control. The use environment of LED plant lights determines its lifespan to some extent.
For air humidity, it is generally better to place the LED plant light in a place as dry as possible, the internal components are not easily corroded, and too much fog will not affect the light supplement effect.
Whether it is ventilated or not, it is more conducive to the heat dissipation of the LED plant light when it is ventilated.
PARAMETERS
